KTI Networks Computer Accessories 24 Port 10 100 Workgroup Switch User Manual

KS-124  
24-Port 10/100 Workgroup Switch  
User’s Guide  
DOC.070524-KS124  
 
z
Runt and CRC Filtering eliminates erroneous packets to optimize the  
network bandwidth.  
z
z
z
z
Support to handle up to 1522 bytes packet.  
LED indicators for simple diagnostics and management.  
Internal switching power supply.  
Plug and Play.  
3. Package Contents  
z
z
z
z
Rackmount Kit.  
User guide.  
Power cord.  
10/100Mbps Fast Ethernet Switch  
4. Hardware Introduction  
4.1 Front Panel  
The unit front panel provides a simple interface monitoring the Switch.  
See the chart in section 4.2 for the status of each LED denotes.  
4.2 LED Displays  
LED Function Color  
Description  
PWR  
Green  
Green  
Lit: Power on  
LNK/ACT  
Lit: Indicates there is a link  
Flash: indicates there is an activity  
Lit: 100Mbps  
10/100  
Green  
Unlit: 10Mbps  
3
 
4.3 Rear Panel  
The rear panel of the 24-port Fast Ethernet Switch indicates an AC inlet,  
which accepts 100-240VAC 50-60Hz power input.  
Specifications  
IEEE 802.3 10Base-T Ethernet  
Standard  
IEEE 802.3u 100Base-TX Fast Ethernet  
- Ethernet  
:
10Mbps (half-duplex)  
20Mbps (full-duplex)  
Data Transfer Rate  
- Fast Ethernet : 100Mbps (half-duplex)  
200Mbps (full-duplex)  
-100Base-TX UTP/STP category 5 cable  
-10Base-T UTP/STP category 3 or 5 cable  
Network cable  
Ports  
24 10/100Mbps Auto-MDI / MDI-X Ports  
System – Power LED  
LED indicators  
Individual port – link/activity and speed LEDs  
283mm(W) x 178mm(D) x 44mm(H)  
Dimension  
Temperature  
Humidity  
Operating 0°C to 50°C (32° to 122° F)  
Storage  
-20°C to 70°C (-4° to 158° F)  
Operating 10% to 90% RH, Non-condensing  
Storage 5% to 90% RH, Non-condensing  
100 – 240VAC, 50 / 60Hz, Auto-sensing  
FCC Part 15 Class B, CE  
Power Input  
Registrations  
4
 
5. FCC Warning  
This equipment has been tested and found to comply with the regulations  
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference when the equipment is operated in a commercial  
environment. This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance with this  
user’s guide, may cause harmful interference to radio communications.  
Operation of this equipment in a residential area is likely to cause harmful  
interference, in which case the user will be required to correct the  
interference at his own expense.  
z
z
z
Reorient the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit in a different room  
that to which the receiver is connected.  
z
Consult the dealer or an experienced radio/TV technician for help.  
6. CE Mark Warning  
This is a Class B product. In a domestic environment, this product may  
cause radio interference, in which case the user may be required to take  
adequate measures.  
5
 

Lenovo Computer Monitor L2062 User Manual
Lifebreath Ventilation Hood 2500EFD User Manual
Life Fitness Treadmill T9 0XXX 04 User Manual
LifeSource Scale UC 322 User Manual
Lincoln Welder AC 225C User Manual
Little Wonder Trimmer Double Edge User Manual
Magic Chef Refrigerator MCBR170BMD User Manual
Melissa Microwave Oven 253 023 User Manual
Melissa Microwave Oven 253 027 User Manual
Mellerware Hot Beverage Maker 21405 User Manual