KCD-400
Industrial 1000Base-T to 1000Base-X
Gigabit Media Converters
The industrial KCD-400 media converter series provides industrial strength Gigabit Ethernet copper
-to-fiber media conversion,allowing for 1000Base-T-to-1000Base-Xover multi-mode or optional
single-mode fiber optical media. With the SFP (Mini-GBIC) connector design,the media converter
not only supports existing variety of multimode and single mode fibers,but also preserves the
flexibility to adapt to any change of your fiber network in the future.
Benefits :
Plug and play design with no configuration setting
Wide operating temperature range for temperature critical environment
Support DIN-rail mounting and panel mounting
Provide two power input types to meet more application needs
Accept wide power input voltage range for application flexibility
Industrial-rated Emission and Immunity performance
Key Features :
Comply with IEEE 802.3ab 1000Base-T,802.3z 1000Base-SX/LX standard
Provide direct media conversion for Gigabit copper and Gigabit fiber
Support full wire speed conversion
Support transparent conversion of any packet types with no packet length limitation
DIN Rail Mounting Bracket
Support auto-negotiation with link partners
Provide link pass through between copper and fiber link
Provide SFP on fiber port for mounting variety of fiber options
Low power consumption
Two power interface types:screw terminal block and DC Jack
Supports DIN-rail mounting and optional screwed plane mounting
Specifications :
Standard
IEEE 802.3au, 802.3z
Conversion
Packet Types
Direct 1000BASE-T to 1000BASE-X with minimum latency
Transparent conversion with no modification to :
- Standard IEEE 802.3 Ethernet packet frames
- IEEE 802.1Q tagged packet frames
Panel Mounting Bracket
Copper Port
Shielded RJ-45,1000Mbps
Auto-negotiation capable
Auto-MDI/MDI-X crossover function
Fiber Port
Network Cables
LEDs
SFP connector with pre-configured SFP fiber transceiver
Far End Fault support
Copper port : Cat.5e recommended or higher up to 100m
Fiber port : MMF 50/125µm, 62.5/125µm, SMF 9/125µm
Power status, SFP ON status
Link status, Optical link status
080110
|