BEAMLRK, BEAMMMK, BEAMSMK
• Suitable for Beam Smoke Detectors
Series 6500
• Three-part reflector set increases the
detection range to 100m
fig. A
• Multi-mount kit with
three-dimensional angle adaptation
fig. B
• Surface-mount kit
fig. C
Reflector BEAMLRK
The Reflector BEAMLRK (fig. A) increases the maxi- parts and the reflector included with the detector are
mum range of the Beam Smoke Detector Series 6500 put together, thus resulting in one large reflector.
to 100m. The package contains 3 parts. These three
Specifications
Material
Plastic
Dimensions W × H × D
Dimensions W × H
Order number
Order name
200 × 230 × 10 (mm), one piece
400 × 460 (mm), entire reflector area
244024
Reflector/6500/75-100M BEAMLRK
Multi-Mount Kit BEAMMMK
The Multi-Mount Kit BEAMMMK (fig. B) is used for atta- sloped. If the reflector is installed by means of the multi-
ching the Beam Smoke Detector Series 6500 or the mount kit, the range is limited to 70m.
reflector under difficult conditions, e.g., if the ceiling is
Specifications
Order number
Order name
244025
Multi-Mount Kit/6500 BEAMMMK
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
BEAM-ZBH_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
|