LENNOX HEARTH PRODUCTS
KITS AND ACCESSORIES
750,119M
Rev. B 03/2008
3-Piece LOUVeR ASSeMBLY KiTS
iNSTALLATiON iNSTRUcTiONS FOR LOUVeR ASSeMBLY KiTS FOR USe
®
™,
™,
WiTH MeRiT MeRiT PLUS OR eLiTe SeRieS GAS FiRePLAceS
LOUVER SET KITS
Polished Brass
cat. # Model
Brushed Stainless
Painted
cat. #
Model
Models Where Used
88L27
LVR24PB-2 88L31
LVR24BS
88L23
LVR24c-2 eDVPF, eDPF(-2), eDVcR, eDcR(-2), eDVcL, eDcL(-2), eBVPF, eBPF(-2), eBVcR, eBcR(-2), eBVcL,
eBcL(-2), eBBAY
88L28
88L29
LVR35PB-2 88L32
LVR40PB-2 88L33
LVR35BS
LVR40BS
eDV3530, eD3530, MPD3530, MPD35ST, MPD35PF, MPB35ST
88L25 LVR40c-2 eDV4035, MPD4035, eDVST, eDVPF, eDVcR, eDVcL, eBVST, eBVPF, eBVcR, eBST, eBPF, eBBAY,
eBcL, eBcR
88L30
LVR45PB-2 88L34
LVR45BS
eDV4540, eD4540-2, MPD4540
MDR3328, MDT3328, MPDT3328, MPDR3328
MPD35PF
26M45 LVR33MPB 26M46 LVR33MBS
H7024
LVR22PB
H7025
LVR22BS
Table 1
GeNeRAL iNFORMATiON
iNSTALLATiON iNSTRUcTiONS
™
™
These louver assembly kits may be used with Merit , Merit Plus or
Note: Do not operate fireplace without the eyebrow installed in its normal
position. See Figure 2 for models with louvers or Figure 3 for models
with radiant panels.
®
Elite series gas fireplaces. Kit applications are shown in Table 1.
KiT cONTeNTS:
1 ea. Top louver assembly panel
1 ea. Bottom louver assembly panel
1 ea. Nameplate logo -
not used on short panel of EDVPF, EDVCR, EDVCL, EDPF(-2), EDCR(-2) & EDCL(-2)
1 ea. Installation Instructions
Top of Appliance
Louver Assembly
Top of Door Frame
Hood must be installed as shown.
Figure 2 - Louvered Face
Bottom Louver
Top Louver
Top of Appliance
Top Radiant Panel
Top of Door Frame
Lennox
Nameplate
Hood must be installed as shown.
Figure 3 - Clean Face
Figure 1 - Louver Kit Contents
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
|