ADDONICS TECHNOLOGIES
Model: AEUDMACF, AEUDMACFWP (read-only)
ADDONICS TECHNOLOGIES
Model: AEUDMACF, AEUDMACFWP (read-only)
4-Pin Molex
4-Pin Molex
40-Pin IDE
Connector
40-Pin IDE
Connector
Power Connector
Power Connector
Power & drive
activity LED
Master or Slave
Setting
Power & drive
activity LED
Master or Slave
Setting
CF/MD Slot
CF/MD Slot
Step 1 Mount the IDE-CF Adapter PRO on a 3.5” drive bay.
Step 1 Mount the IDE-CF Adapter PRO on a 3.5” drive bay.
Step 2 Connect a 4-pin Molex power cable from the PC power supply to
Step 2 Connect a 4-pin Molex power cable from the PC power supply to
the 4-pin Molex power connector on the IDE-CF Adapter PRO.
the 4-pin Molex power connector on the IDE-CF Adapter PRO.
Step 3 By default, the IDE-CF Adapter PRO is set as a master device. Set
jumper on IDE Master mode or Slave mode (J5 ON = Master, J5 OFF =
Slave)
Step 3 By default, the IDE-CF Adapter PRO is set as a master device. Set
jumper on IDE Master mode or Slave mode (J5 ON = Master, J5 OFF =
Slave)
Step 4 Connect 40-pin IDE connector to IDE controller on motherboard
Step 4 Connect 40-pin IDE connector to IDE controller on motherboard
using IDE flat cable.
using IDE flat cable.
Note:
Note:
The IDE-CF Adapter PRO supports hot swap.
The IDE-CF Adapter PRO supports hot swap.
TECHNICAL SUPPORT (8:30 am to 6:00 pm PST)
TECHNICAL SUPPORT (8:30 am to 6:00 pm PST)
Phone:
Email:
408 453-6212
Phone:
Email:
408 453-6212
|
Motorola 68000202474 C User Manual
JVC KD S895 User Manual
Jura Capresso IMPRESSA X70 User Manual
Grindmaster B SAP User Manual
FieldServer NCA2 NFS2 3030 User Manual
Durabrand CR 210 User Manual
Clarion DXZ866MP User Manual
Blackberry 7730 User Manual
Alpine CDM 9823 User Manual
ABB JPC 01 User Manual